1. The split colloid mill has a simple structure, convenient maintenance and crushing grinding effect is good!
2. Due to separate motor and gear grinding, the heat generated in work noninterference, easy to work long hours.
3. Gear grinding speed is higher than the motor speed, so the output the corresponding also is big, even if the same type, the same power of motor, the output of horizontal also significantly greater than the vertical.

Model		JML-50		JML-80	JML-100	JML-120	JMF-80	JMF-100	JMF-120	JMF-140	JMF-180
Emulsification fineness um 锛坰ingle cycle or multi-cycle锛		5~40		3~40	2~40	2~40	3~40	2~40	2~40	2~40	2~40
Adjustment range mm		1-0.01		1-0.01	1-0.01	1-0.01	1-0.01	1-0.01	1-0.01	1-0.01	1-0.01
Output t/h change according to materials			0.01-0.2	0.3-1	0.5-2	0.7-3	0.3-1	0.5-2	0.7-3	1-4	2-5
Motor	Power kw		1.1	3	5.5	7.5	4	5.5	7.5	11	15
	Pressurev		380	380	380	380	380	380	380	380	380
	Stirring speed r/min		2880	2880	2880	2880	2880	2880	2880	2880	2880
Grinding diameter mm			鈭50	鈭80	鈭100	鈭120	鈭80	鈭100	鈭120	鈭140	鈭180
Discharge port diameter 锛堟椂锛			鈭15	鈭25	鈭32	鈭40	鈭25	鈭32	鈭40	鈭40	鈭65
Cooling water pipe 锛堟椂锛			鈭1/8銆	鈭1/4銆	鈭1/4銆	鈭1/4銆	鈭1/4銆	鈭1/4銆	鈭1/4銆	鈭1/4銆	鈭1/4銆
Dimensions	Length mm		420	520	560	560	640	750	750	820	980
	Width mm		280	400	420	420	550	620	620	700	800
	Height mm		760	900	950	950	1030	1080	1080	1250	1550
Weight kg			45	84	113	135	210	275	295	325	450

The process parameters that need provided when choosing the Colloid Mill: the nature of material, working pressure, temperature, specific requirements, etc.