1.       According to Structure: there are Vertical Colloid Mill and Split Colloid Mill

2.       According to Angle of Appearance: there are Ordinary Colloid Mill and Sanitary Colloid Mill

The main structures of colloid mill are grinding parts, the base transmission department and dedicated motor. The dynamic and still millstones in the core part and mechanical seal parts are the most key parts. Therefore, according to the different natures of the materials, the selection must be different. But the materials are made of stainless steel or specific materials. The motor need to be designed specifically, depend different model.  The motor flange should install retaining plate to prevent leakage.

1. Food Industry: dairy products, chocolate, soy sauce, jam, peanut butter, butter and beverage

4. Daily Chemical Industry: shoe polish, toothpaste, cosmetics, balsam, soap, and detergent, etc

5. Other Industry: building industry, paper industry, plastic industry, battery industry, etc

Relative to the pressure-type homogenizer, colloid mill first is a kind of centrifugal equipment. It has the advantages of simple structure, convenient maintenance and is suitable for high viscosity materials and large particles materials. Also, its main drawback is determined by its structures.

    First, as for the centrifugal movement, the flow is not constant, corresponding to viscous material, the flow vary greatly. For example, the same equipment, in dealing with viscous lacquer and thin dairy fluid, the flow speed can differ 10 times above.      

    Second, because of the high-speed friction between the stator and material, it is easy to generate large quantity of heat, and make the material processed.

    Third, the surface is easy to wear, and after wearing, the refined results will be significantly reduced.

Model		JML-50		JML-20741907	JML-100	JML-120	JMF-20741907	JMF-100	JMF-120	JMF-140	JMF-120741907
Emulsification fineness um 锛坰ingle cycle or multi-cycle锛		5~40		3~40	2~40	2~40	3~40	2~40	2~40	2~40	2~40
Adjustment range mm		1-0.01		1-0.01	1-0.01	1-0.01	1-0.01	1-0.01	1-0.01	1-0.01	1-0.01
Output t/h change according to materials			0.01-0.2	0.3-1	0.5-2	0.7-3	0.3-1	0.5-2	0.7-3	1-4	2-5
Motor	Power kw		1.1	3	5.5	7.5	4	5.5	7.5	11	15
	Pressurev		320741907	320741907	320741907	320741907	320741907	320741907	320741907	320741907	320741907
	Stirring speed r/min		2820741907	2820741907	2820741907	2820741907	2820741907	2820741907	2820741907	2820741907	2820741907
Grinding diameter mm			鈭50	鈭20741907	鈭100	鈭120	鈭20741907	鈭100	鈭120	鈭140	鈭120741907
Discharge port diameter 锛堟椂锛			鈭15	鈭25	鈭32	鈭40	鈭25	鈭32	鈭40	鈭40	鈭65
Cooling water pipe 锛堟椂锛			鈭1/8銆	鈭1/4銆	鈭1/4銆	鈭1/4銆	鈭1/4銆	鈭1/4銆	鈭1/4銆	鈭1/4銆	鈭1/4銆
Dimensions	Length mm		420	520	560	560	640	750	750	820	920741907
	Width mm		220741907	400	420	420	550	620	620	700	207419070
	Height mm		760	900	950	950	1030	1020741907	1020741907	1250	1550
Weight kg			45	84	113	135	210	275	295	325	450

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1.       The technical parameters of colloied mill  in the chart are standard configuration. Any specific requirements, please let us know.

2.       JML-50 is experimental colloid mill, also can be changed to 220V voltage.