1銆丼plit colloid mill鈥檚 motor and gear grinding packed separately, through the pulley, the belt drive, so the speed of the grinding besides decided by motor rotate speed, also related to the two pulleys; it鈥檚 similar to the ten-speed bicycle.

2銆丼plit colloid mill also called horizontal colloid mill, production is more complex than vertical colloid mill, design should consider when in the production of the colloid mill axial positioning, it鈥檚 in case the motor shaft axial dynamic touch tooth wear, preferably before the motor end cover bearing, because the design of the motor rotor and shaft axial thermal expansion in motor front bearing key to rear bearing direction, to reduce the influence on grinding head clearance.

3銆丼plit colloid mills grinding鈥檚 speed is higher than motor rotate speed, so the production is corresponding big, even if the same model, the same power of motor, separation of production will also significantly greater than the vertical.

4銆丼plit colloid mill due to separate motor and gear grinding, the heat generated in work noninterference, it鈥檚 easy to work long hours.

Model		JML-50		JML-80	JML-100	JML-120	JMF-80	JMF-100	JMF-120	JMF-140	JMF-180
Emulsification fineness um 锛坰ingle cycle or multi-cycle锛		5~40		3~40	2~40	2~40	3~40	2~40	2~40	2~40	2~40
Adjustment range mm		1-0.01		1-0.01	1-0.01	1-0.01	1-0.01	1-0.01	1-0.01	1-0.01	1-0.01
Output t/h change according to materials			0.01-0.2	0.3-1	0.5-2	0.7-3	0.3-1	0.5-2	0.7-3	1-4	2-5
Motor	Power kw		1.1	3	5.5	7.5	4	5.5	7.5	11	15
	Pressurev		380	380	380	380	380	380	380	380	380
	Stirring speed r/min		2880	2880	2880	2880	2880	2880	2880	2880	2880
Grinding diameter mm			鈭50	鈭80	鈭100	鈭120	鈭80	鈭100	鈭120	鈭140	鈭180
Discharge port diameter 锛堟椂锛			鈭15	鈭25	鈭32	鈭40	鈭25	鈭32	鈭40	鈭40	鈭65
Cooling water pipe 锛堟椂锛			鈭1/8銆	鈭1/4銆	鈭1/4銆	鈭1/4銆	鈭1/4銆	鈭1/4銆	鈭1/4銆	鈭1/4銆	鈭1/4銆
Dimensions	Length mm		420	520	560	560	640	750	750	820	980
	Width mm		280	400	420	420	550	620	620	700	800
	Height mm		760	900	950	950	1030	1080	1080	1250	1550
Weight kg			45	84	113	135	210	275	295	325	450

The process parameters that need provided when choosing the Colloid Mill: the nature of material, working pressure, temperature, specific requirements, etc.