Cold and Hot Cylinder_ Cold and Hot Tank_ Aging Tank

Cold and hot cylinder is also known as aging tank, it belongs to a device in stainless steel container. And it has the characteristics such as energy-saving, noise reduction, corrosion resistance, strong production capacity, easy cleaning.

Structure of Cold and Hot Cylinder(Tank)

structure:the interior, jacket, insulation layer, the outer foreskin, speed reducer, agitator, thermometer and so on.
The interior: stainless steel SUS304, mirror-polished surface.
Jacket:the A3 or 1Cr18Ni9Ti steel plate, strengthen circle spiral device, the cold water from bottom to top (without pressure), to achieve the best heating and cooling purposes.
Insulation group: stainless steel plate cast into scales, insulation layer use polyurethane or mineral wool to keep the temperature, achieve insulation effect.
Speed reducer:cycloid planetary reducer, fixed in the tray of the beam, a shaft gear wheel connects with the impeller flexibly for easy removal and cleaning.
Thermometer:specification 100C-1000C, installed on the beam, straight out to minimum medium position, makes sure that can indicate temperature even when the liquid material to the lowest position, to achieve sterilization and aging purposes.

Usages of Structure of Cold and Hot Cylinder(Tank)

The cold and hot urn is widely used in dairy industries, food, pharmacy, chemical industry, beverage and so on..
And it is especially suitable for the milk pasteurization and insulation for the essential equipment of heating, cooling, warm-keeping, sterilization and storing slurry , which also is the essential equipment for ice cream production line.

Technical Parameters of Structure of Cold and Hot Cylinder(Tank)

Volume	300L	400L	500L	600L	800L	1000L	1500L	2000L	3000L
Body diameter锛坢m锛	桅800	桅800	桅900	桅1000	桅1000	桅1000	桅1200	桅1300	桅1600
Body height锛坢m锛	600	800	800	800	1000	1220	1220	1500	1500
Motor power锛坘w锛	0.55	0.55	0.55	0.55	0.55	0.75	1.5	2.2	3
Stirring speed(rpm)	36r/min
Working pressure	鈮0.09Mpa
Working temperature	锛100鈩
Accessories	Thermometer銆乻afety valve銆乸ressure gauge

Notes:

1. The technical parameters of cold and hot urn is standard configuration. Any specific requirements, please point out.

2. The jacket working pressure鈮 0.09Mpa also can be made according to customers鈥 requirements.

3. The process parameters that need provided when choosing the cold and hot tank: the nature of material, working pressure, temperature, specific requirements, etc.