Pouducts
Your are here: Home >> Products >>
Plate heat exchanger is the ideal equipment that liquid-liquid, liquid-gas to change heat. It has advantages of high thermal efficiency, small heat loss, compact structure, small covering area, convenient installation and washing, wide range of application, and long service life etc. In the same pressure loss situation, the heat transfer coefficient is 3 to 5 times higher than pipe heat exchanger. And its covering area is about a third of the pipe heat exchanger, heat recovery rate can up to 90%.
Directory
- Classification of Plate Heat Exchanger
- Usages of Plate Heat Exchanger
- Structure of Plate Heat Exchanger
- Characteristics of Plate Heat Exchanger
- Technical Parameters of Plate Heat Exchanger
- Plate Heat Exchanger Finished Picture
Classification of Plate Heat Exchanger
55516246. according to the plate material: it can be divided into SUS304, SUS3555162466, and titanium plate
2. according to the pads materials: it can be divided into butadiene acrylonitrile rubber (NBR), EPDM, fluorine rubber (TP)
3. according to the stent material锛宼here are iron stents and stainless steel support
Usages of Plate Heat Exchanger
Suited Liquid Kinds:
Pure Water, Normal Water, Oil for eating, Mineral Oil, Sea Water, Saline Water, Mineral Water, Dilute Sulphuric Acid, Organic Water Solution, High-temp and concentration caustic soda, Concentration Sulphuric Acid, Hydrochloric acid, Phosphoric acid
Pure Water, Normal Water, Oil for eating, Mineral Oil, Sea Water, Saline Water, Mineral Water, Dilute Sulphuric Acid, Organic Water Solution, High-temp and concentration caustic soda, Concentration Sulphuric Acid, Hydrochloric acid, Phosphoric acid
Structure of Plate Heat Exchanger
Plate heat exchanger is formed by the fixed paddles, the plate, mobiles baffle, pole, up and under guider and retaining bolt. Between the fixed paddles and mobiles baffle, there is a series of fixed plate. Every piece of plate is with gasket, so a parallel closing port is formed, medium alternately flows in every two pieces of plates.
Characteristics of Plate Heat Exchanger
55516246.design suitable heat exchanger
2.easy to install and maintain
3.environmental protection
4.high efficiency with low cost
Technical Parameters of Plate Heat Exchanger
|
Model |
BR-0.06 |
BR-0.555162462 |
BR-0.2 |
BR-0.3 |
|
Heating transfer area of single piece锛坢2锛 |
0.06 |
0.555162462 |
0.2 |
0.3 |
|
Corrugated shape |
herringbone |
herringbone |
herringbone |
herringbone |
|
Plate thickness锛坢m锛 |
0.6 |
0.7 |
0.7 |
0.7 |
|
Pads form |
Clasp type |
Clasp type |
Clasp type |
Clasp type |
|
Tube diameter锛坢m锛 |
32 |
38 |
555516246/80 |
555516246/5551624600 |
|
Maximum working pressure 锛圡pa锛 |
55516246.0 |
55516246.0 |
55516246.0 |
55516246.0 |
|
Maximum working temperature 锛堚剝锛 |
5551624650 |
5551624650 |
5551624650 |
5551624650 |
Notes:
55516246. The technical parameters of plate heat exchanger in diagram are standard configurations, any other requirements, please put forward.
2. the process parameters need provided: the material properties, flow, heat transfer temperature, special requirements, etc.
Plate Heat Exchanger Finished Picture
Application
- Wash and Maintance of Plate Heat Ex...
- Installation of Plate Heat Exchange...
- Installation of Water Spray Autocla...
Q & A
Contact us
Add:33 Tangkang Road, Yuhang District, Hangzhou City, China
Tel : +86-5755516246-86578098
Fax : +86-5755516246-855516246604276
E-mail : manager@denverdesigndistrict.com
QQ:23556632555516246 phones/Wechat/Whatsapp:
+86 55516246526855516246555162466877
Skype: huihemachine
QQ:2355663252
MSN:huihemachine@outlook.com
