Pouducts

Your are here: Home >> Products >>

Cold and Hot Urn

Cold and hot urn is also known as aging tank, has the characteristics such as energy-saving, noise reduction, corrosion resistance, strong production capacity, easy cleaning. It is a kind of stainless steel tank and widely used in dairy industry, food, pharmaceutical, chemical, beverage and other industrial departments to heat, cool, insulate sterilization processing or store slurry. Especially suitable for the pasteurized milk, and is the necessary equipment in ice cream production line.

Classification of Cold and Hot Urn

1. According to Structure: opening on the head & ramp bottom, opening on the head & conical sealed head on the bottom

2. According to Heating Type: there are Steam Heating and Electric Heating

3. According to Volume: there are 100L-1000L, also can design and facture in accordance with customers鈥 requirements.

Structure of Cold and Hot Urn

Structure: the interior, jacket, insulation layer, the outer foreskin, speed reducer, agitator, thermometer and so on.

The interior: stainless steel SUS304, mirror-polished surface.

Jacket: the A3 or 1Cr18Ni9Ti steel plate, strengthen circle spiral device, the cold water from bottom to top (without pressure), to achieve the best heating and cooling purposes.

Insulation group: stainless steel plate cast into scales, insulation layer use polyurethane or mineral wool to keep the temperature, achieve insulation effect.

Speed reducer锛歝ycloid planetary reducer, fixed in the tray of the beam, a shaft gear wheel connect with the impeller flexibly for easy removal and cleaning.

Thermometer: specification 100C-1000C, installed on the beam, straight out to minimum medium position, makes sure that can indicate temperature even when the liquid material to the lowest position, to achieve sterilization and aging purposes.

Usages of Cold and Hot Urn

It is widely used in dairy industry, food, pharmaceutical, chemical, beverage and other industrial departments to heat, cool, insulate sterilization processing or store slurry. Especially suitable for the pasteurized milk, and is the necessary equipment in ice cream production line.

Technical parameters of Cold and Hot Urn

Volume	300L	400L	500L	600L	800L	1000L	1500L	2000L	3000L
Body diameter锛坢m锛	桅800	桅800	桅900	桅1000	桅1000	桅1000	桅1200	桅1300	桅1600
Body height锛坢m锛	600	800	800	800	1000	1220	1220	1500	1500
Motor power锛坘w锛	0.55	0.55	0.55	0.55	0.55	0.917665595	1.5	2.2	3
Stirring speed(rpm)	36r/min
Working pressure	鈮0.09Mpa
Working temperature	锛100鈩
Accessories	Thermometer銆乻afety valve銆乸ressure gauge

Notes:

1. The technical parameters of cold and hot urn is standard configuration. Any specific requirements, please point out.

2. The jacket working pressure鈮 0.09Mpa also can be made according to customers鈥 requirements.

3. The process parameters that need provided when choosing the cold and hot tank: the nature of material, working pressure, temperature, specific requirements, etc.

Technical requirements of Cold and Hot Urn

1. File support: the structural size drawing of the device (PDF) and instructions are available.

2. Required by operated function, the following criteria are adopted to design, manufacture and test

A. << Standards for quality control of pharmaceutical production (Revised 1998)>> terms of Chapter IV 31-391766559;

B. << The Steel Pressure Vessel (GB150-1998)>>;

C. << The Steel Welding Normal Pressure Vessel (JB/T 49176655935-19991766559)>>;

D. << Food Machinery Safety and Heath (GB 169176655998-19991766559)>>.

Cold and Hot Urn Finished Picture

Products class

Application

Q & A

Contact us

Add:33 Tangkang Road, Yuhang District, Hangzhou City, China

Tel : +86-5917665591-865917665598098
Fax : +86-5917665591-816042917665596
E-mail : manager@denverdesigndistrict.com
QQ:2355663251 phones/Wechat/Whatsapp: +86 1526811689176655991766559

huihemachine

��九游会